2023-09-25 16:39:15
XCMG presents new drill lines at Fenasan 2023
XCMG Brasil, leader in the heavy machinery sector in China and 3rd in the world in the segment, presents its drilling rigs at Fenasan 2023 (National Sanitation and Environment Fair), new equipment that contributes to efficiency and greater productivity in the sector. The highlights are the XZ360E horizontal drill, the XZ150E drill and the XDN1000H mud-balanced crimped pipe tunneling machine. The fair takes place from October 3rd to 5th, at Expo Center Norte, in São Paulo.
According to Rosimar Aparecida Jacone, sales executive at XCMG Brasil, the XZ360E horizontal drill is recognized worldwide for its efficient operational capacity. “As it has a high/low speed push-pull system and modern engine rotation, it allows for better adaptation, applicability and efficiency of the equipment”, she highlights.
In addition to the XZ360E and XZ150E drills, the company is exhibiting the XDN1000H mud-balanced crimped pipe tunneling machine
With dimensions of 6200mm long x 2280 wide x 2450 high, the XZ360E’s main technical characteristics are a weight of 10 ton, with a nominal power of 154 kW/2200 r/min and a torque of 12600 Nm, with push-pull operating force. of 370 kN, reaching a rotation speed of 140 r/min and a maximum push-pull speed of 36 m/min. It also contains a mud pump with a maximum flow of 320L/min, maximum pressure of 8 MPa, a drill pipe with a diameter of 73 x 3000 mm in length, with a maximum inclination angle of 20° and a maximum diameter of the backream of 900 mm.
The drill rig maximum push-pull of 40 m/min. With a torque of 5400 Nm and a maximum rotation speed of 160 r/min, the equipment features a mud pump with a maximum flow of 200 L/min and a maximum pressure of 8 Mpa. As well as a 60 diameter x 3000 mm long drill pipe, with a maximum inclination angle of 20° and a reaming diameter of 600 mm.
“XCMG has more than 20 years of experience in manufacturing horizontal directional drilling machines. As a result, we occupied the first position in the Chinese industry ranking for more than 10 years, with more than 20 models, both small and large”, says Rosimar.
Another important piece of equipment for the sector is the XDN1000H mud-balanced crimped pipe tunneling machine, which has little impact on traffic, with the benefits of precise positioning and wide geological adaptability. “XCMG has always been concerned with developing equipment aimed at non-destructive methods (MND), so much so that it has been progressively launching a series of crimped tube machines over the last 10 years”, emphasizes Rosimar.
Tunneling machine
The XDN1000H from the exposed drill line has the following main features:
• Small size of the inlet well (minimum diameter of the inlet well is 3300mm and minimum diameter of the outlet well is 2600mm);
• High reliability (hydraulic overload protection system, generating more reliability than electrical machines, replacement of the hydraulic oil hose in place of the power cable, with good waterproof and humidity performance);
• High efficiency (hydraulic motor has high output torque and speed, double confluence pump, idle speed up to 1200mm/min, shortening waiting time), operational safety (exclusive 24V low voltage operating console, the deviation correction seal gives good sealing effect and long service life;
• Metal sealed main shaft;
• High degree of modularity (secondary crushing device as optional for rock disc and soil disc).
For more information regarding the company and products visit: www.xcmg-america.com
About XCMG:
Founded in March 1943 in China, XCMG today occupies the 1st position in the heavy machinery sector in the Chinese market and 3rd in the world. The XCMG Group is made up of several heavy machinery factories for civil construction, mining and agribusiness, offering the most complete and competitive lines on the market. Highlights include cranes, earthmoving, paving, drilling, lifting and concreting. In this ranking, it holds 20% of the world market and 70% of the Chinese market.
The Technology Center and Research Institute for Construction Machinery are located in Xuzhou, China. All investment in technology, quality and guarantee of its products and Human Resources certifies XCMG as a leader in the construction machinery sector, according to a study by the Chinese Enterprise Technology Center.
Around the world, XCMG has established a broad sales network, consisting of more than 110 distributors, offering products and services in several countries. In Brazil, since 2004, the company has served the entire country, maintaining the factory production line installed in the city of Pouso Alegre, Minas Gerais. The strategic location of the manufacturing unit, close to the banks of the Fernão Dias highway, strengthened the brand’s ties with a market that is increasingly demanding in quality, technology and innovation.
1695695975
#XCMG #drills #exhibited #Fenasan