The small key or the code of your padlock are lost? Sometimes our memory fails us and we sympathize. Whether it’s the lock on your suitcase, closet, piggy bank or door, we imagine how frustrating it is to deal with this inconvenience. Fortunately, with a simple trick, you will no longer have to run to the DIY stores to buy a lock picking kit, just try a technique from the pros that solves this blocking problem in no time.
Padlock help? There’s no need to panic, losing the key is now a simple matter as we’ll show you an easy and effective method to open your bolt without applying strong pressure or wasting your energy. If the padlock lock is stubborn, we will stand up to it. Decryption
When you realize that opening your padlock will not be done without damage, you immediately think of painful solutions such as adjustable wrenches, picking kits, tension rods, office paper clips, the handle of a screwdriver and the sophisticated toolbox… All these elements work to unlock the bolt of the padlock and open its ring. However, the only problems reside in the difficulty of their use as well as the loss of time.
Read also: The trick to opening a padlock easily: a simple battery is enough
The trick of matches: an effective tool to easily open a padlock without picking it
Chemistry makes solutions and sparks! Who would have thought that these small wooden sticks charred at one end and which ignite on contact with fire might easily open padlocks.
Indeed, it is a clever method to open the bolt of the padlock without calling on the hands of an experienced locksmith. Nevertheless, they have a specific role in this mission that you thought was impossible. Ready to work the magic? Let’s go, let’s go!
Above all, even if you are impatient to speed up the mechanism, you must gather all the elements necessary for this operation. Here is the list of gear you will need:
- A box of matches ;
- A roll of wire;
- A sheet of stiff paper;
- An elastic band;
- A clamp;
- A hammer ;
- A slider;
- A lighter
Now that you are well equipped, let’s move on to the method:
- As you lay the sheet of paper on the table, start by cutting off the charred head of the matches;
cut off match heads. Source: spm
- Grind the pieces into powder using the handle of the hammer;
- Carefully pour the charred powder inside the lock, tapping off the excess;
Step 2: Pour the carbonized powder into the lock. Source: spm
- At the same time, cut a small piece of metal wire with the pliers and wrap it around the casing, leaving one end up;
- Cut another small piece of wire and flatten its end with the hammer (watch your fingers);
- Insert the flattened part into the small hole of the padlock and tie its second end to that of the first wire that you wound with the elastic band;
Step 3: position of the two metal wires. Source: spm
- Trim the uncharred end of the match using the slider (or knife) until it becomes sharp;
- Insert the pointed end of the match into the hole in the padlock with respect to the flattened part of the wire;
- All that remains is to light the spark and let the magic happen: once the match is ignited by the fire of the lighter, a small mechanism is triggered and presto, the padlock is unlocked! Amazing, right?
Step 4: light the match to open the padlock. Source: spm
To better visualize this operation, the link of the following video will be very useful:
Now that you are in a good position to open your padlock and want to venture out with another clever idea, we give you the aluminum can trick! And yes, you have to remember to keep the can packaging following consuming your favorite drink. Are you short of gear, it does not matter, you will achieve it with the means on board!
Read also: Scratches on the body? With the trick of the magic cloth, they disappear in the blink of an eye!
How to open a master lock special padlock without a key with a can?
In an emergency, everything lends itself as a solution, including the tried and tested bobbin trick for opening locks. This requires creative recycling of the soda can. On the job, you will certainly have a better chance of finding the can than coming across the lost key. Without further ado, discover the method in the following steps:
- Take a previously emptied and washed can, a pair of sharp scissors and gloves;
- Wear your gloves, flatten the can and cut it with the scissors (or the cutter) to have a small aluminum plate;
- Fold the edges of the plate on themselves so as not to hurt yourself to make a sharp object;
- Insert the folded plate into the hole of the padlock by pivoting it in the opening direction until you hear the opening click… Bingo, you have succeeded!
Here you are, dear readers, with a useful and practical little guide to opening your padlock in an emergency. Our final piece of advice is to practice on a padlock at your leisure to have a hand in case such an inconvenience occurs in the future…
Read also: Drivers can save more than 70 euros on fuel each year by avoiding a simple mistake at the gas station