The trick to cleaning the black joints of the tiles

2023-04-19 19:03:43

Ah those tile joints… you can put your own effort into them to clean them, but you quickly find yourself tired before your efforts pay off. But in truth, it doesn’t have to be so painful! In this article, we show you that it is possible to attack these areas using ingredients that are wisely waiting somewhere in your pantry.

Tile joint cleaning – Source: spm

Soap residue, mould, grease, food, limestone… we see green and immature ones in our bathrooms and kitchens! No wonder that said. These are two parts that exude a large amount of humidity and other inconveniences… Needless to say, therefore, that regular cleaning is required… As for the dirty seals in particular, well nothing insurmountable! Far from there. Here are the simple steps to clean them in a snap:

Read also: How to clean dirt and mildew from washing machine gasket?

What you need:

1. 2 tablespoons of white vinegar;
2. 1 tablespoon of washing-up liquid;
3. 2 tablespoons of toothpaste;
4. 2 tablespoons baking soda;
5. The juice of a lemon.

Tile cleaning – Source: spm

Instructions :

1. Start by mixing the ingredients in a clean bowl. They must be well incorporated into each other.
2. Soak a clean sponge in the mixture and then pass it over the tile grout lines. You can also use a brush to scrub.
3. Wait a few minutes (about 10) for the product to take effect.
4. Rinse copiously.
5. Use a clean cloth to wipe the lines.

If this solution can easily get rid of mold, grease and soap scum, the best thing is to perpetuate the habit! Clean your grout once a week or more to avoid spending too much time on grime buildup.

If you’re worried about breaking down the gasket, there’s a way to clean it without scrubbing it. The method relies on the cleaning power of baking soda and hydrogen peroxide, which together can clean grout lines without you having to put in any effort. Place at the stages of realization of your ecological cleaner:
What you need:

• 1/3 cup baking soda
• 1/4 glass of hydrogen peroxide
• 1 teaspoon of dishwashing liquid

Instructions :

1. Mix the ingredients in a bowl
2. Apply the mixture to the grout lines
3. Leave on for 10 minutes
4. With a clean towel, gently pat or wipe
5. Let the seals dry

Yes, the secret to cleaning tile joints without scrubbing them is as simple as that! With baking soda’s ability to remove stubborn dirt and the excellent bleach alternative of hydrogen peroxide, cleaning your floor is a breeze!

Shower seal cleaning – Source: spm

The joints in the bathroom are sometimes made of a sealant which is a real breeding ground for mold! The good news is that even if cleaning them seems difficult, the task is not so difficult. Here again, two undeniable stars of natural cleaning are in the spotlight: Baking soda and white vinegar.

1. We will first create a kind of paste by mixing 1 cup of baking soda and a little water.
2. Dampen a damp cloth with the paste.
3. Rub the product over the blackened sealant to sufficiently cover it.
4. Spray the dough with the equivalent of a cup of white vinegar and leave to act for 5 minutes
5. Scrub with a stiff bristle brush
6. Run a damp sponge over the sealant to rinse it off
7. Then dry with a clean cloth.

If stains persist, do not hesitate to repeat the operation. Patience pays off!

It is also advisable to use hydrogen peroxide to eradicate the spores. In this case, generously spray the bathroom joints after using the method in question. In this case, a mixture of 1 part hydrogen peroxide to 4 parts water should do the trick. Rinse with cold water, dry with a clean towel and you’re done! Also note that this solution is also suitable for shower seals.

Clean the floor joints with white vinegar and lemon

We’ve mentioned baking soda and white vinegar as great natural cleaners, but don’t forget that there’s a third ingredient that’s just as good as them. We are obviously talking about lemon and its natural acids perfect for household tasks! On tile joints, citrus can quite simply work wonders, especially when mixed with the two products mentioned above:

What you need:

• 2 glasses of water
• 1/4 glass of lemon juice
• 1/2 glass of baking soda

Instructions :

Read also: How to remove mold from tile joints?

1. Mix all the ingredients well then pour them into a spray bottle if you want to make a cleaner in the form of a spray
2. Apply the product to the joint lines and leave to act for 15 minutes
3. We then move on to a damp cloth to rinse before leaving to dry. And that’s all you need to do!

Resistant traces? Equip yourself with a used toothbrush and scrub. You don’t have to strain yourself either! All you have to do is brush the area lightly as the dirt lifts away.

If you don’t like using chemicals, these grandmother’s tricks should make you happy to take care of your floors with ingredients that we all have at home. Most of us anyway…

Read also: 4 tips for cleaning tile joints from mold and dirt

1681942687
#trick #cleaning #black #joints #tiles