2023-09-02 16:41:00
When you use a power strip, you have to be careful of the risks you run. Because its use remains very dangerous!
The power strip is essential in every household. But be careful not to plug in too many items at the same time… We’ll reveal the reasons in this article.
Watch out for the power strip
Since it was invented in 1905 by the Frenchman Lucien Gaillard, the power strip has been an essential for everyone. She is without a doubt what there is more useful on planet earth. You therefore have the possibility of plugging it into your kitchen to connect several appliances.
You can also put it in the living room to connect the TV, your computer and other devices. However, it is important to respect the load indicated on the power strip in question. And for good reason, it can cause you big problems.
Because yes, even if it doesn’t look like it, be aware that the power strip can therefore be dangerous. And for good reason ! She can therefore be responsible for a fire ! So said the blog of Izi, by EDF. ” In France, more than 30% of house fires are caused by an electrical problem. »
On its site, MMA insurance explains the reason why it better to avoid overloading. »Non-compliant and non-renovated installation. Carelessness when using appliances. Or light fixtures, Danger, overloaded sockets… one in three fires is of electrical origin. »
Know that a quarter of domestic accidents are caused by electrical problems. Because power strips have a power limit that should not be exceeded. So let’s say you plug in devices that consume far too much electricity, there will be a case of overheating. But also a fire hazard.
A bad habit to avoid!
Power strips are therefore very practical for connecting several devices at the same time. But beware ! Because improper use can therefore cause accidents at home. Moreover, one in four domestic accidents results from improper electrical installation.
Be aware that there are devices that should not be connected at the same time. Like the washing machine, dryer, oven, television, fridge etc. There are also all the energy-intensive household appliances. Not to mention auxiliary heaters and air conditioners. But also appliances such as waffle makers, coffee machines, toasters, etc.
All consume far too much energy. And they also tend to heat up really fast, and really hot. But the question arises, what is the reason why they cannot be plugged into a power strip? Simply because they are too powerful for the device in question. The latter does not provide enough energy.
It can therefore cause overload and fire. This is the reason why these devices must be plugged into a wall socket. This avoids any risk of overvoltage.
Another mistake not to make: connecting a power strip to another! Because this increases the chances of overheating ! Care must therefore be taken that the sum of all the devices does not exceed 3680 W. The aim is to avoid any risk of overcurrent. And the risk of electrocution.
Above all, be sure to choose a power strip that is indeed complies with current standards. One thing is certain, a power strip is not without danger! So to avoid any type of domestic accident, be very careful, and above all do not make this mistake which is very common.
Shay Coquelit
Hi, I’m Shay, a web writer specializing in celebrity news and TV shows. Ever since I was little, I have loved following the Cannes Film Festival. For six months, I have been writing articles in the People, cinema and media section. My passion for these fields is reflected in each of my articles. Stay tuned on Tuxboard for my latest news and analysis!
1693679007
#Stop #plugging #devices #power #strip #heres #Tuxboard