We are more for the second opinion! Besides, look no further for a solution! We have one for you! Is it regarding paying more to have it shortened? Not at all, because you are going to do it yourself! Indeed, this operation is a real breeze and can be done in two minutes at home. Let’s see together the steps to follow to adapt jeans to the right length without breaking the bank!
Jeans too long. Source: spm
Failing to be able to take centimeters with a magic wand, you will have to shorten your jeans to be able to wear them. Before proceeding, you must of course take your measurements, so that the final result is perfect, and that your pants do not go from too long to too short!
Read also: How to thread a needle easily?
To do:
- Put it on and turn the lower legs;
- Determine the correct length of the hem using two pins. (one in front and one behind);
- In our tip, we’re going to keep the original hem, so don’t factor that into your measurements!
- Take off your jeans, remove the pins and iron the hem you marked.
Follow this super simple technique and shorten your jeans to your desired length!
Recall that the point that interests us is the original hem on the leg of our denim pants. The goal is therefore to shorten the jeans while maintaining the appearance and quality of the latter!
Seamstress tip for shortening jeans
Mark your hem. Source: spm
Normally, your hem is already marked! Your pant leg is turned over and the original hem comes just above where you want to sew the new one;
Sew your seam and trim the excess fabric. Source: spm
Machine sew just under the original hem and then trim the excess fabric;
All that remains is to turn the jeans over. Source: spm
Iron your pants on the right side to remove creases.
Your jeans are successfully shrunk. Source: spm
Here are some more tips for you, to obtain an impeccable result following having shortened your denim pants yourself!
- Wash your pants at least twice before confirming that they are too long! Denim tends to shrink in the wash!
- Once washed, try it on with heels anyway. If the length is right with your shoes, hemming is not necessary;
- If your jeans are decorated with tears or special seams, for example, be sure to position the sewing pins so as not to damage it;
- Use a thread of the same color as the jeans to obtain a clean and neat seam!
Shorten jeans by hand: how to shorten pants without a machine?
If using a sewing machine is out of the question for you, because you don’t know how to use one at all or you simply don’t have one, there are other ways to shorten pants!
One of them is to use iron-on! :
Read also: How to hang a painting without drilling the wall?
- Turn your pants over and make your crease;
Once the fold is in place, iron the mark. Source: spm
- Cut a strip of double-sided iron-on to the width of the pants;
- Remove the backing paper and place the strip at the fold;
Position the strip inside the fold. Source: spm
- Iron for 20-25 seconds using strong pressure to make sure everything sticks! And it’s over! Your jeans are ready to use!
Once the crease is secure, you can turn your pants inside out to wear them. Source: spm
Jeans too big. Source: spm
If you have other problems with your jeans besides the length, such as a size that is too big for example, here’s a little bonus tip! Just pass the button of your pants through the first belt loop. And then you close your jeans normally to have a tight waist! No more no less ! It’s simple as hello !
So ! The circle is complete ! You can now shop without worrying regarding the length of the jeans, because by following our instructions, you will become an expert in hem!
Read also: How to recycle plastic cups?
