Ramallah – the world of the homeland
The Apple Watch may be the favorite and most recommended smart watch for some, but setting it up and making the best use of its services are important things that you should pay attention to when buying and starting to use it. Here are seven important tips to authorize the new Apple Watch for use, according to (The Seventh Day) website.
Charge the watch:
The first thing to do is charge your watch, and you’ll want to keep the charging dock nearby during the setup process as your Apple Watch may need to be charged once more, especially if there are software updates to install.
Once charged, turn on your Apple Watch by holding down the button at the bottom of the Digital Crown for a few seconds.
When it’s active check your iPhone because, most likely, an alert already appears on the screen asking if you want your phone to start the pairing process.
Plus, the required Watch app comes pre-installed on your iPhone as well.
Click Continue on the iPhone screen to get started and follow the simple instructions.
Set up your Apple Watch:
If you’ve owned an Apple Watch before, your new Apple Watch can be set up to reflect the settings you had previously, including installed apps, Siri preferences, and even the wrist you usually wear.
If you want to set it up as a new Apple Watch, tap Customize settings and look for Set Up as New Apple Watch at the bottom of the screen.
If this is your first Apple Watch, you won’t get this option.
The whole process will take 10 minutes at most, be smart with your passcode, even if you don’t like Apple Watch passcode, you have to use it in some situations.
If you set one up, you must tap the PIN each time you put your Apple Watch back on your wrist following you take it off.
Notices and Apple Pay:
If you want to use Apple Pay, you have to use a passcode, and I highly recommend that you don’t make it too long, since you have to tap it on the small screen.
I know this probably goes once morest all the usual security warnings, but the idea of regularly tapping a 12-digit PIN on my wrist isn’t cool.
Software updates:
There’s a good chance you’ll have to wait for the latest version of watchOS to download once you’ve set up your Apple Watch for the first time.
In the Watch app go to General then Software Update to check, if one is available it will start downloading immediately.
I always do this right away because it’s better than waiting for iOS to send you an alert, as well as to get the latest features and fixes before you get into using the watch.
This is where you’ll need the charger once more. Once you’ve downloaded the update, you’ll need to put your Apple Watch back on the charger to install it.
The battery also needs more than 50% charge, which shouldn’t be a problem, provided you fully charge your Apple Watch before setting it up.
It is very convenient to remove software updates at this time, it does not take some time, so be prepared to spend up to an hour doing all this.
Enjoy choosing your watch face:
While you’re waiting for the update to download, it’s time to take a look at the available watch faces.
On the main screen of the Watch app, tap the watch face image currently set to your watch, then look for the Gallery Faces option at the bottom of the screen.
Tap on it and you will find all available watch faces, each one can be customized with different colors, different designs and different complications.
Apple Watch settings are important to change
One of the best things regarding the Apple Watch is that by default, almost all of the basic health and fitness features are activated, and the always-on display works instantly if you have a Series 8 or Urtla, plus it requires a lot of information from your iPhone to make sure the watch is right. operate smoothly.
To change the sound alert with notifications, which is sometimes done by default:
Go to Settings > Sounds & Touches and then either use the small speaker icons to turn the volume up or down or use silent mode to mute the sounds completely.
You can also set silent mode by pulling up the quick settings from the watch face and tapping the bell icon.
Add other Apple Watch bands to your collection:
The Sport Band and Sport Loop are the default options for the Apple Watch, and one of them will likely be the one that came with the new Apple Watch.
It’s easy to tighten when exercising to get the most accurate heart rate reading, and soft enough to wear all night and track your sleep.
