2023-11-13 00:32:18
There is a successor to the legendary small case C2. It has a detachable and modular body, and its heat dissipation and expansion capabilities are greatly improved. Everyone has the stereotype of a small case that has poor expandability and poor heat dissipation. This time I will introduce a small case. The “C6 Handle” portable case launched by JONSBO is small, has good expandability, and can be carried around. The C6 Handle is 266mm long, 202mm wide, and 295.2mm high. In terms of mATX cases The size is very small. The front panel, top cover and side panels are all equipped with circular hole panels, which provide good heat dissipation effect. In terms of expandability, the front panel can choose to install two 2.5-inch devices or one 3.5-inch device. If no hardware is installed, The disc can also be replaced with a 120mm fan, a 120 or 140mm fan can be installed on the top, and another 120 or 140mm fan can be installed on the bottom. This is very expandable for a small chassis; I /O includes USB3.2, USB3.2 Gen 2 Type-C, HD audio input/output jacks and power switch; the internal space can support up to mTX motherboard, the graphics card can support up to 255mm, and the CPU cooler can support up to 75mm , the power supply can be installed with standard ATX size. Now let’s take a look at the JONSBO C6 Handle portable case whose expansion capabilities cannot be underestimated! Main body and accessories ▼The product model, appearance and specifications are marked on the outer box ▼The product model and color are marked on the side, with black and white colors available ▼Accessories include product instructions, cable ties*5, various fixing screws and handles , the handle is passed around the fixed point on the casing and then fixed with Velcro ▼ Overview of the C6 Handle body, the overall size is small, you can directly see the full round heat dissipation holes on the front, and the I/O configuration is below ▼I / OIncludes USB3.2, USB3.2 Gen 2 Type-C, HD audio input/output jacks and power switch ▼The corners are made of polygonal plastic, which is used for structural fixation on the one hand, and on the other hand, it can reduce the corners when carrying Sharp points may cause injuries to the mover ▼The front panel is removable ▼The front panel can be installed with two 2.5-inch devices or one 3.5-inch device. If you do not install a hard disk, you can also install a 120mm fan instead. It is a multi-functional design , allowing players to choose by themselves ▼At a glance at the top, the upper cover is also designed with a round hole, and there are hand-held designs on both sides. It can be carried around with the handle included in the accessory by passing it through and fixing it ▼The upper cover is also detachable and can be installed 120 or 140mm fan ▼ Rear view ▼ There is a top cover opening design at the top, which is convenient for players to open the top cover ▼ The power supply is above the motherboard ▼ The first two pieces of the interface card baffle are reusable, and the remaining two pieces are disposable Sexy design ▼ Product model sticker ▼ Bottom view, there is a large area filter at the bottom, but you must remove all four feet for cleaning It has a round-hole ventilation design and is fixed without screws. It is very convenient to disassemble. ▼ The handle must pass through these two fixed positions before it can be carried away stably. The internal structure and actual assembly ▼ Overview of the internal space and configuration, above the motherboard and There are openings at the bottom to facilitate cable routing ▼The motherboard can support up to mATX, and there is a backplane design for replacing the processor without disassembling the motherboard ▼A 120 or 140mm fan can be installed on the top cover ▼The power supply is installed above the motherboard ▼Interface The first two pieces of the card baffle are reusable, and the remaining two pieces are disposable designs ▼The bottom can be installed with a 120 or 140mm fan ▼The front panel is a composite design, and you can choose to install two 2.5-inch devices or one 3.5-inch device , you can also install a 120mm fan ▼ Actual installation picture, this time the hard disk installation uses two 2.5-inch SSDs, the motherboard is iTX specifications, the overall space is enough ▼ If the installed graphics card is not very long, you can also put the power supply in front The wires that are not used by the supplier are arranged there. Summary: The JONSBO C6 Handle portable case is really very compact. It also has a detachable handle design, which is convenient for players to move the console and carry it out. The internal structure must be compact design. That’s right, the expandability is maximized in a limited space, and the detachable front panel, top cover and side panels are all mesh designs, which can improve the heat dissipation effect. For expansion, mATX motherboards and ATX power supplies can be installed. , two 120 or 140mm fans can also be installed for heat dissipation, and two 2.5-inch or 3.5-inch devices can be installed on the front panel. If not all hard drives are installed, it can be turned into a 120mm fan. It is a very good design, allowing players to match it by themselves. Choice, following all, now with M.2 expansion, 2.5-inch and 3.5-inch hard drives are no longer necessary! ! Overall, the expandability of the C6 Handle is remarkable, and it also has a good heat dissipation expansion design. Are you looking for a case product that is small in size and has good expansion capabilities? JONSBO C6 Handle portable case is a good choice!
1699844847
#JONSBO #Handle #portable #case #successor #legendary #small #case #detachable #modular #body #heat #dissipation #expansion #capabilities..
