through the iPhoneit is possible to connect different devices without using a cable, since it can be synchronized through Bluetooth technology, which allows us to have greater comfort.
However, when using Bluetooth, these devices can be drained by constant use, so it would be a problem if they turn off just when you need them most. Therefore, on the iPhone you have the option of knowing the remaining battery percentage.
In this way, you will be able to be aware of how much longer you can use them in the day and not have more uncertainty. Whom DEPOSITwe show you a guide with all the steps you must follow from your cell phone with iOS.
MIRA: iPhone: these models will be able to update to iOS 16.2 without problems
How to see the battery of your Bluetooth devices connected to the iPhone
With these steps you will be able to know how much battery your AirPods, speakers and other devices that you have connected to your iPhone have left.
- What you should first do is open the Settings app from your iPhone.
- After this, look for the Bluetooth option and click on it,
- Immediately, you will see a list of devices that you use frequently.
- Now, look for the one you have connected on your iPhone.
- Subsequently, click on the letter “i”, located next to it.
- In this way, you will be able to see how much battery is available.
- Finally, close the app.
How to share internet from an iPhone
These are some ways to share WiFi without using any cable or physical connection. Follow the directions below.
1. From an access point
- What you should first do is enter the Settings app.
- After this, choose the option Mobile data.
- Click on the Personal hotspot option.
- Now, give it a name that you remember.
- Once this is done, you will need to enter a new password.
- Immediately, activate the WiFi network so that you give access to other iPhones.
2. From Bluetooth
- Before you start you have to have the internet sharing mode activated.
- To do this, go to the Settings app, followed by Mobile Data.
- After this, hit Personal hotspot and select Allow access.
- Once your cell phone is configured, you must activate the bluetooth of the other device.
- Then, choose the Internet Sharing option.
- The system will ask you to confirm that the code has been entered in a valid way.
- Finally, hit Link and you’re done.
