Reveal CAD image iPhone 14 Pro Max Overall use the original design. but change the notch and adjust the size of the screen bezel to be thinner and still uses the same Lightning port
CAD image iPhone 14 Pro Max
ShrimpApplePro Post a CAD drawing of the design of the iPhone 14 Pro Max with details regarding the design dimensions in several points as follows:
The width of the iPhone 14 Pro Max from the CAD image is 78.53 mm, the height is 160.71 mm, the thickness is 12.16 mm, and the bezel is 1.95 mm thick. The edge of the iPhone 14 Pro Max from the CAD image is thinner than the iPhone. 13 Pro Max is approximately 19.4% at 2.42 mm thick.
The speaker on the top of the iPhone 14 Pro Max, from the CAD figure, is approximately 0.57 mm tall, which is approximately 62.5% less than the iPhone 13 Pro Max at 1.52 mm tall.
Next are the holes on the screen that are capsule and circular holes. The report states that The right circular hole has a diameter of 5.59 mm. The circular hole in the left capsule hole is the same diameter. The width of the capsule hole is 7.15 mm and the distance from the hole on the screen to the edge of the screen is 2.29 mm.
The rear camera has a convexity of approximately 4.18 mm. The diameter of the rear camera with the ring is 13.85 mm without the ring is 8.05 mm. The Flash has a diameter of 6.9 mm and the LiDAR is 6.5 mm in diameter.
In the picture you can see the bottom speaker holes and the connection port as well. The report states that it’s not a USB-C port, so it might be Ligthning.
iPhone 14 is reported to be launched in late 2022, with 4 models: iPhone 14, iPhone 14 Max, iPhone 14 Pro, iPhone 14 Pro Max, and possibly the iPhone 14 Pro, iPhone 14 Pro Max will change. Using a hole design on the screen, the iPhone 14, iPhone 14 Max still uses the same notch design.