Launch Control is still referred to as a “standing start process”. It represents an electronic aid that allows racing car drivers to perform acceleration. So how do you activate Launch Control?
Launch Control activation steps
First of all, it is important to know that Launch Control is activated with the engine running, the vehicle stationary and Sport or Track mode activated. Once these arrangements have been made, you keep your left foot on the brake pedal before pull the two paddles on the steering wheel. You should release them only when the “Launch Control ON” message appears on the dashboard.
Further reading:
Tyre: here’s why choosing Michelin is a good idea
Within 60 seconds after posting, you are going deep press the accelerator pedal beyond the hard point. You must perform this task with your right foot. You will then notice that the engine speed will automatically stabilize at around 2500 rpm. This configuration usually takes a maximum of 4 seconds. In this time frame, you will release the brake pedal with the aim of starting your vehicle sportily.
The conditions for non-activation of Launch Control
Steps alone are not enough to successfully activate your car’s Launch Control. You must also take into account the conditions which block the activation of the standing start. Thus, you will find yourself in a better posture to easily accomplish this exercise.
Also read:
Exploring the Possibilities of California Electric Bikes for Sustainable Mobility
First, it is essential to know that theactivation du Launch Control cannot automatically be performed if you have had to perform it five times in a row. Also, if the “engine water temperature” is too cold, the desired result may not be achieved.
In the same vein, a clutch temperature, gearbox oil or an inclination percentage that is too high will certainly block the standing start procedure.
You therefore understand that if the function is inhibited by one of these conditions, the message “Launch Control ON” will not be able to appear on the dashboard.
Some measures to adopt for a good activation of Launch Control
In order to successfully activate Launch Control, you must take the necessary arrangements. To do this, it is imperative to equip your vehicle with tires in good condition, a good engine speed and above all, an excellent reaction time. The most complex step in activating a standing start turns out to be the combination of these ingredients.
As for the engine speed, you must ensure that it is relatively high. In motorsport in the past, the only cars that managed to get off to a flying start were all Renault. Today, more and more race car manufacturers are focused on making strong engine speeds. If you notice a failure at the level of that of your ”car”, you can simply buy a new one from these major brands. With a high engine speed, the start will be much faster when you release a sharp blow on the engine.
In addition, you must learn to manage stress. The adoption of this posture is also essential. It is clear that the BPM (Beats Per Minute) will increase. But, you need to take deep breaths and stay focused on the red lights at the start.