2023-05-19 19:15:42
Plastic is a material used inside the car, and even outside, such as for the bumper. For various reasons, scratches can appear on the plastic, which can impact the aesthetics of the vehicle, depending on the case. Fortunately, it is possible to remove them provided you know the effective tricks. Discover in this article three tips to remove scratches on the plastic of your car.
Removing Scratches From Your Car’s Plastic Body With Toothpaste
Whether it is the bodywork or the interior of your car, a stripe that appears is anything but aesthetic. Sometimes you don’t need big bucks to get it off. One trick is to use toothpaste.
Also read:
Are personalized license plates legal?
However, it should be remembered that this scratch removal trick only works when the trace left is a little deep. To check the depth of the scratch, just run your fingernail over it. If your nail stops in the scratches, then they are too deep to remove with toothpaste.
When the scratches on the plastic are shallow, your nail won’t stop. In this case, you will need a clean cloth and soapy water. By dipping the cloth in lukewarm water, rub the surface of the bodywork to rid it of grease and dirt.
Also to discover:
Conversion tax horsepower into din horsepower
Then use a dry cloth to dry the part before applying the paste to another damp cloth. Using the latter, rub in a circular motion until the scratches disappear, then clean off the excess paste with a clean, dry cloth. Toothpaste acts as a mild abrasive product.
Use sandpaper for deep scratches on plastic
When the scratches on the plastic of the car are deep, you will need sandpaper. Here, it will be necessary to opt for sandpapers of different grains for the polishing which will be done in several stages.
After purchasing the abrasive product that is paper, you must wet it from the first step. This is important to reduce its abrasive power. Before rubbing the affected surface, you must fold the paper to reduce the impact area on the bodywork. In the next step, scrub the area of the scratches using a circular motion.
If you rub vigorously, you risk creating new scratches, which is not the desired effect. Start polishing with coarse grit sandpaper. It is at the penultimate stage of the process that the bodywork is rubbed with finer grain paper.
For the finish, it will be necessary to polish the plastic using a clean cloth on which plastic wax has been applied.
Touch-up paint pen: an economical choice
Use paint is a very effective way to remove scratches from the plastic body of a car. Most of the time, this is the safest trick, especially when the scratches are deep. Even when these are superficial, the application of paint is possible.
However, seeking the services of a professional for painting can be relatively expensive, hence the use of a touch up paint pen. The latter is very effective with superficial scratches. To remove the scratch, first clean the area of the bodywork with the scratches. You will need a clean cloth for this step.
Next, you will need your touch-up paint pen, which must be shaken well before use. Using this, place a few drops of paint in the scratches on the bodywork and then spread them out. Apply the paint as many times as necessary, that is, until the scratches disappear.
Indeed, the paint contained in this type of pen resists UV rays. In addition to drying out very quickly, it is not likely to be discolored.
1684708673
#erase #scratch #plastic #vehicle