Good price good quality Intel 12th generation cost-effective motherboard [BIOSTAR H610MH D4 이엠텍] : Dana and DPG DPG my heart

#Sponsored

hello? Today, I would like to introduce a motherboard for those who want to use the Intel 12th generation CPU, but are worried about the burden of the motherboard price. [BIOSTAR H610MH D4 이엠텍]no see.

Currently, I want to use the 12th generation of Intel, but I know that there are many people who choose Ryzen because of the price of the motherboard. Especially for gaming [인텔 i3-12100이나 i5-12400]For those who choose , the price of the motherboard is inevitable. In terms of price, H610 board can be purchased for less than 100,000 won, but considering the specifications used for H610 motherboards, there are many cases of choosing B660 motherboard instead of H610. If you choose the B660 motherboard, you have to spend about 50,000 won more in price, so it will be a difficult decision for users who choose cost-effectiveness. However, there are people who are mentally burdened to choose Ryzen, and there are cases where they have to choose Intel. finally [인텔 12세대 H610메인보드]There is a motherboard that reduces the price burden and meets the performance and specifications by selecting . that’s the [BIOSTAR H610MH D4 이엠텍]no see.

Let’s take a quick look at the specifications of the motherboard.

model : BIOSTAR H610MH D4 EMTECH

socket : Intel 12th Gen 1700

Chipset: Intel H610

memory : DDR4-3200Mhz 2 slots Max 64GB

Interface : PCIe 4.0 x 16

usb : 3.0 2 x 2.0 4

Power supply: 8+1+1 phase

Overall, it’s an H610 motherboard, so it’s not a good spec. Although it is an m-ATX, it only supports two memory slots and the rear USB 3.0 is not enough. But it’s H610 motherboard. [PCIe 4.0]is supported, and the most characteristic part is that the power part is a whopping 10 phases (8+1+1). In general, H610 motherboards often have poor power supply. The minimum is 5 phases and the maximum is 8 phases. However, the BIOSTAR H610MH motherboard has a power supply comparable to the B660 motherboard.

This is a picture of the box.

It has a clean design in black.

The components are in the box.

We provide 2 SATA cables, IO shield, manuals, and CD-ROMs that are not often provided these days.

This is a picture of the motherboard.

It is a simple yet simple design. There are a total of 10 gray-colored power units, which are self-powered for 10 phases. If you look closely at the bottom, there are 4 LEDs to the left of the SATA port. This is an LED that indicates the status of the motherboard, usually found on high-end boards. [CPU, DRAM, VGA, BOOT] It shows a total of 4 states. Although it is a cost-effective H610 board, it is a main board that shows unexpected functions, including power supply and status LED.

This is a picture of the rear I/O shield side.

From the left, D-sub terminal, HDMI terminal, 2 USB ports, keyboard PS2 terminal, 2 USB 3.2 terminals, RJ45 terminal, 2 USB ports, and audio terminal. It is a simple composition. It is a pity that there are only two USB 3.2. I think it would have been really good if there were two USB 2.0 and four 3.2.

This is the terminal on the back of the motherboard.

It’s a neat composition. You can see that all the solders are in good shape.

The system prepared for this review is as follows.

CPU : Intel I5-12400F

M/B : BIOSTAR H610MH D4 EMTECH

Ram: Corsair DDR4 3600Mhz 8GB * 2 = 16GB

Vga: MSI Radeon RX6600 MECH 2X D6 8GB

cooler : JONSBO CR-1000 AUTO RGB

power : Zalman Megamax 500W

case : Zalman N4 CTRL

This is the motherboard socket.

I will put I5-12400F here.

The 12th generation 1700 socket is already rumored to be rectangular, so it feels like the CPU is slightly floating. Moreover, the socket’s rigidity is stronger than that of the existing socket, so it seems to be more like that.

in that socket [인텔 I5-12400F]and apply thermal paste.

The thermal was laid out normally. hehe

[BIOSTAR H610MH D4 이엠텍]I tested the LED function, which is a characteristic feature of .

The LED turns on at the part where the problem occurs as the part goes back and forth.

I put the CPU in, installed the cooler, and first settled on the motherboard.

The unique configuration is that the 8-pin motherboard is usually positioned at an angle parallel to the edge of the motherboard… This guy is positioned at a right angle. If the cooler is large, it will be difficult to install that part. [잘만 CNPS10X PERFORMA BLACK] instead of cooler [존스보 CR-1000 AUTO RGB]has been replaced with

After installing the graphics card, I did a test boot.

The PC was able to start normally without any problems.

After installing all the systems and completing the complete assembly, I took a picture.

As for the motherboard BIOS, it was not easy to find a configuration because it was the first time I had seen BIOSTAR. I also set the memory to XMP and installed Windows 10 normally.

However, it is a little disappointing that the Windows 10 (almost latest) version could not find the network drive. It was a pity that I couldn’t find the LAN driver even though the Windows 10 installation file was burned to the latest version 2 months ago. In the end, I connected the CD-ROM and installed the driver.

I checked it with cpu-z.

BIOS is up to date as of March 25, 2022. However, when I checked the contents of the memory, it was strangely not 3600Mhz even though I had selected the XMP 2.0 profile. [3200Mhz(Dram Frequency가 1596Mhz의 2배가 원래주파수)로 인식] has been As a result, the latency CL value is tighter, but the clock itself is not the original value of the XMP. Is it because the maximum clock value of the motherboard is 3200Mhz? However, last time AMD’s A320 motherboard was also 3200Mhz in its own specifications, but it was recognized as 3600Mhz.

First, I ran a simple benchmark with Cpu-z. The number is the same as the number I benchmarked with other motherboards and the error range is the same.

I ran the benchmark with Cinebench R23.

The multi-benchmark score is 11183. The original score was about 12000 points, but it was about 1000 points lower than the original score. I thought the score was a little low, so I benchmarked it several times and it was the same. If you look closely, you can see that the all-core clock starts at 4.0Ghz and then decreases without being able to maintain 4Ghz during the bench. Fortunately, the single score showed a normal value with almost an error range. It seems that the power part is in 10 phases, but it seems that the power part cannot be maintained.

I benchmarked the game.

– Assassin’s Creed Odyssey (High): Average frame rate 87fps

– Division 2 (Good): Average frame rate 94 fps

– Forza Horizon 4 (Very High): Average frame rate 133 fps

Overall, as a benchmark for the game, I benchmarked with my existing motherboard. [인텔 I5-12400F]and there was no big difference. It seems to give you the performance you need. the main board [BIOSTAR H610MH D4 이엠텍]By using it as an I5-12400F, it seems to get enough performance. The cinebench score is disappointing, but we have confirmed that there is no problem in playing the game.

If you look at the price of PC parts these days, when a new generation comes out, they drop the price… Strangely, the price rises unexpectedly. In particular, there is a phenomenon that the price of Intel’s CPU and mainboard rises. The Intel I5-12400F I’m using has also gone up by more than 20,000 won, and the motherboard I’m using has also gone up by 10,000 to 20,000 won. In this situation, when choosing Intel 12th generation, you have no choice but to worry about the price of the motherboard. in such a situation [BIOSTAR H610MH D4 이엠텍]can use Intel 12th generation at a reasonable price. Of course, i7 level or higher is difficult, but i5 level can be seen as a motherboard that can be used sufficiently. Here is a brief summary of the pros and cons of this motherboard:

– EM-Tech’s 3-year free customer support service you can trust

– Affordable Biostar motherboard for Intel 12th generation

– Biostar can be used with confidence with improved durability and stability!

EM-Tech has released a motherboard with a good cost-effectiveness that costs less than 100,000 won for the H610 chipset. That said, it also supports 3-year free A/S. Customer Support Meeting of high satisfaction EM-Tech and cost-effectiveness I don’t think there is anything more satisfying to customers than this. In conclusion, if you are configuring Intel 12th generation cost-effective products, be sure to check out this product and this will be the end of the review. thank you