Fix Blue Screen with ACPI BIOS ERROR Code on Windows, Linux
“Blue Screen of Death with ACPI BIOS ERROR code can indicate quite complicated troubleshooting. It is not a particularly positive prognosis because most of the time it is due to hardware failure. However, often the The problem is also a system crash that can be repaired.At a minimum, you should try to resolve the BSOD manually.
Causes of the ACPI_BIOS_ERROR error
The main causes of failure are many and varied:
- Bad BIOS settings;
- Damage to the operating system;
- driver failure;
- Hard drive malfunction;
- Physical failure of the processor or RAM.
The characteristic of the ACPI_BIOS_ERROR error is that it is cross-platform. It can appear on all versions of Windows, as well as Linux, Ubuntu. The error may or may not be accompanied by the code 0x000000A5. It is known to happen once and disappear following a reboot, but there are cases where following every reboot the BSOD appears and does not let you enter the system.
How to fix BIOS ACPI ERROR BSOD?
Let’s start the solution by the easiest ways to apply. They should be tried by everyone. If they work, great, now you know what the problem was. In cases where they don’t work, you can draw the logical conclusion of a hardware problem.
Update and reinstall drivers
“Blue screens of death” with various codes often appear due to driver issues. Breakdowns can be caused by outdated, up-to-date but problematic and incompatible device drivers. They are worth upgrading. If the error is suspected to have started occurring following a certain software update or the connection of a new device, it is worth trying a rollback.
Autonomous System Scan
Several users have responded positively to this method, they have managed to fix their BSOD with “Windows Defender”. To do this, you have to boot the system in “Safe mode”, open “Settings” – “Security” and select “Scan offline”. There’s a good chance this will work.
Restore the system
Another method that has received positive feedback from users. It is applicable to laptops, especially Samsung devices. The idea is the following:
- Turn off the laptop and unplug the drive.
- Boot your computer and enter “recovery mode” (usually with the F4 key).
- Plug in the SSD drive and select an appropriate recovery option.
- Run SW update and update BIOS.
Uninstall recently installed software
If software has been installed in the recent past that may be harmful to your BIOS, it is worth removing. In general, it is worth removing all rogue programs and those that are actively running or managing system files.
ACPI and AHCI settings
Note that the ACPI standard is really necessary for Windows and it is not convenient to disable it. The computer will not be able to boot as ACPI automates the power management of PC components. However, it is not uncommon to switch to a lower power mode. The ACPI option is found in the BIOS and is set to S1. This solution is especially useful for those who get the error following waking up from hibernation mode. Disabling AHCI through the BIOS may also work.
Disable external hardware
By the time the system boots up following the ACPI_BIOS_ERROR BSOD appears, there should be minimal hardware connected to it. It’s best to disable almost anything extraneous and reconnect following a full boot. The necessary software will be installed and the error should not appear.
Disable overclocking
When overclocking your RAM, CPU, or graphics card, the “blue screen of death” can be the norm. It depends on the hardware model, some are not suitable for overclocking. Return your hardware to factory default speeds through software.
RAM Status Check
The failure of one of the RAM cards may be the cause of the problem. It is best to diagnose RAM memory, this can be done with the built-in tools of the operating system or with the MemTest86 utility. It is recommended to use the second option by creating a self-booting flash drive.
Reinstall the operating system
If an ACPI BIOS ERROR occurred while trying to install the system, it is a good idea to change the mode. For example, if the installation was in compatibility mode, try Legacy mode and vice versa.
Most of the above steps are applicable to Windows, Linux, Ubuntu, etc. systems. Unix, so it’s a good idea to change the mode. Unix systems, so it will probably work everywhere. If none of the above helps, the ACPI BIOS ERROR is caused by a hardware failure. Most often, users face crashes in RAM and processors. It is worth having a technical service center diagnose them.