Cooler Grasp TD500 MAX – Pre-installed ATX3.0 case with thickened 360 diploma built-in water cooling, 850 watt energy provide, and two-section energy wire for simple set up

Cooler Grasp TD500 MAX – Pre-installed ATX3.0 case with thickened 360 diploma built-in water cooling, 850 watt energy provide, and two-section energy wire for simple set up

2024-05-28 09:02:54

TD500 MAX is the primary case within the Cooler Grasp MAX collection to undertake ATX specs. Like NCore 100 MAX and MR200P MAX, it has a built-in energy provide and built-in water cooling, making it simpler for gamers to arrange their computer systems. As well as, this new TD500 MAX makes use of pre-installed motherboard and graphics card energy cords to attach extension cables. Subsequent set up of the motherboard and graphics card energy provide turns into straightforward, simplifying the steps of putting in laptop parts.

Let’s begin from the skin in and take a better have a look at the options of this new ATX case from the MAX household.

Key options:

  • The looks inherits the TD500 collection chassis
  • Comes pre-assembled with case, energy provide and radiator
  • Putting in laptop parts simpler
  • Excessive compatibility and efficiency
  • Personalized AIO cooling resolution for Mobius collection flagship followers
  • Two-stage patented energy wire connector
  • Humanized screw storage design
  • Cut back the problem of assembling computer systems and full strains

Chassis look and fundamental specs

TD500 MAX inherits the looks of the TD500 Mesh V2 chassis and replaces it with the unique grey coloration of the MAX collection household. It’s matched with a polygonal grid made utilizing Effective Mesh expertise. The entrance panel takes under consideration the capabilities of large-area air consumption and mud filtering. The decrease entrance panel The silver Cooler Grasp brand brings some texture embellishment to the low-key entrance face. The rear of the case helps 7 units of enlargement slots, which might set up a set of 12 cm followers, and the facility provide part adopts a bottom-mounted design.

The entrance panel adopts a slanted design and is positioned on the junction of the entrance and high of the case. It gives two units of USB 3.2 Gen1, 1 set of USB 3.2Gen 2×2 Kind-C interfaces, and a set of three.5mm headphone and microphone interfaces. TD500 MAX additionally has a With one button, you may change RGB coloration gentle with one click on.

Because the TD500 MAX is manufactured from glass, there are massive openings on the entrance, backside and high of the case for warmth dissipation, and it’s geared up with a detachable filter for simple cleansing. As well as, the aspect panels of the glass aspect and the facility provide storage space are locked with hand screws.

02

03

04

05

06

The cool code logo-shaped energy button has its personal white gentle, and the entrance I/O has bodily buttons to rapidly customise the lighting results.

07

08

09

10

11

Within the case equipment part, along with the fundamental laborious drive slide rails, shock absorbing gaskets, cable organizers, and cable ties, this case has a built-in two-stage energy wire connector and built-in water cooling, so the equipment are additionally Consists of 24pin, CPU 4+4Pin, 8pin and PCIe 8pin energy extension cables, in addition to clips and thermal paste for the newest processors from Intel and AMD.

Sharp-eyed readers ought to have observed that there are not any motherboard screws or laborious drive screws within the equipment, proper? I’ll simply provide you with a fast overview right here, and followingward once I introduce the case, I’ll point out the ingenuity of this case’s elements storage.

12

Inside particulars and configuration

The TD500 MAX case measures 499 x 210 x 500mm, with comparatively adequate inner set up house. It helps Mini-ITX and ATX motherboards, and graphics playing cards as much as 38 cm lengthy. As for the followers, the entrance and high of the case can assist as much as three units of 120mm followers or two units of 140mm followers, and one 120mm fan will be put in on the rear of the case.

The built-in built-in water cooling is pre-installed on the entrance of the case and is provided with three 120mm Mobius RGB followers.

13

15

CPU air cooling can assist a peak of 165mm. Mainly, most air cooling merchandise available on the market usually are not an issue. The ability provide half can assist merchandise as much as 200mm lengthy. There may be 1.9cm of wiring house behind the motherboard, which must be sufficient for precise set up. , this can be verified later throughout implementation.

number 17

As for the storage system, the TD500 MAX additionally makes use of a set of detachable laborious drive racks positioned in entrance of the facility provide. The laborious drive rack can accommodate two units of three.5″ gadgets, and a set of two.5″ gadgets will be put in on the highest. An extra two units of two.5″ gadgets will be put in behind the motherboard, which is mainly adequate for normal use.

18

No. 19

20

twenty one

twenty two

By means of the pre-installed personalized 80Plus Platinum GXII 850W ATX 3.0 totally modular energy provide and patented two-stage energy wire connector, TD500 MAX straight provides energy to the motherboard’s 24pin, 4+4Pin and 8Pin CPU and PCIe 8pin The adapter extension cable is related to the facility provide, and the ATX 3.0 12VHPWR energy wire can also be pre-installed on the facility provide.

Reserve a socket straight within the case comparable to the place of the motherboard, and set up it by means of the included wire extension. There isn’t any have to run the wire from the once more to the entrance of the motherboard. If you do not want to put in a further 3.5-inch or 2.5-inch laborious drive, you may even join it to the aspect of the motherboard. There isn’t any have to take away the aspect panels of the casing, which is basically handy.

16

The motherboard and graphics card energy provides have been pre-pulled to the entrance, making set up and wiring very handy!

twenty three

twenty four

As well as, a hidden screw storage field is designed within the opening of the unique energy provide subdivision cowl, which is paired with a water-cooling pump manufactured from recycled plastic to scale back packaging and plastic use, and is environmentally pleasant to each customers and the surroundings. There isn’t any want to fret in regards to the screws being misplaced or having nowhere to retailer them following meeting.

25

After opening the quilt, there may be perforated foam inside to retailer laborious drive screws, motherboard screws and nut sleeves.

26

Now we have beforehand examined the cool MASTERLIQUID 360 ATMOS. This built-in water cooling can also be used within the MAX household this time, and the efficiency is additional improved. It’s geared up with a thickened 38mm water cooling radiator and the fan is changed with elevated air quantity and air strain. The flagship Mobius 120P high-efficiency fan can extra successfully suppress the warmth generated by the processor following overclocking, even for the Intel i9-14900K high processor.

No. 27

28

The pre-installed water-cooling pipe is related to the water-cooling head from backside to high. The benefit of this configuration is to stop bubbles from accumulating within the water-cooling circuit, which not directly improves the steadiness and sturdiness of long-term use.

As for the wiring half, there’s a 4-pin fan and a 3-pin ARGB HUB on the once more aspect of the motherboard. The water-cooling fan and the fan on the once more of the case have been pre-connected to it, lowering the difficulty of wiring and set up.

29

Actual machine set up

The precise set up makes use of the Gigabyte B760 Gaming WiFi D4 motherboard with ATX specs. The set up steps and comfort are certainly less complicated than strange circumstances. After the motherboard is put in, simply join the facility adapter cable supplied with the case to the corresponding 24Pin host. Simply join the board energy provide, 4+4Pin, 8Pin CPU energy provide, and the corresponding graphics card energy provide, following which plug in USB and different cables. It’s a lot simpler to put in from the entrance of the case.

31

32

33

Then set up the water-cooling head buckle (bear in mind to peel off the protecting sticker on the copper base of the water-cooling head earlier than set up), lock the ATMOS water-cooling head, join the water-cooling head energy provide and ARGB cable, and eventually set up the graphics card, laborious disk and different gadgets, and the meeting is mainly accomplished. course of.

3435

TD500 MAX is pre-installed with 12VHPWR cable. Mainly, the present new graphics playing cards will be straight put in and powered. It additionally has a PCIe 8Pin interface, which might assist graphics playing cards powered by ATX PCIe 8Pin.

Set up expertise

By pre-installing the facility provide, built-in water cooling, two-stage energy cable design, and ample inner house, the precise set up certainly saves loads of steps and time, and the entire line can also be simpler, with a 1.9-centimeter stroll contained in the aspect panel. Though the wire house will not be very large, so long as a number of wire bundles are prevented from overlapping, there isn’t a drawback in putting in and masking the aspect panels.

As much as three units of 120 followers will be put in on the entrance and high, or two units of 150 followers will be put in at every. With the 120mm fan house on the rear, the air quantity and warmth dissipation effectivity are fairly good. The idea of the hidden screw storage field can also be excellent, changing the earlier energy provide compartment. The window is opened for visible functions and the house is used for storage. Irrespective of when putting in a pc or updating elements, screws have a spot to position them and keep away from dropping them.

Lastly, I can’t assist however point out a couple of small issues that I feel will be improved following the precise set up. First, the screws offered usually are not magnetic, and the screws are straightforward to fall off throughout set up or elimination. Secondly, the quilt of the hidden screw storage compartment is caught. The tenons are very tight, which barely impacts the smoothness of set up when opening the quilt.

38

39

40

sensible testing

Because the TD500 MAX makes use of the thickened ATMOS 360 built-in water cooling, in fact it’s mandatory to make use of the i9-14900K with the RTX 4080. Contemplating that strange players might not essentially use it for overclocking, commonplace frequencies and voltages had been used for testing.

testing platform

CPU

Intel i9-14900K

motherboard

Gigabyte B760 Gaming WiFi D4

Reminiscence

Kefu BOLT XR DDR4-3600 8G*2

graphics card

NVIDIA GeForce RTX 4080 Founder’s Version

The take a look at is split into two elements. With the facility wall restriction eliminated, the pc is first burned on the CPU/AIO commonplace fan pace for 20 minutes, following which burned once more at full pace. The graphics card half is examined on the default pace. Discover out whether or not the airflow and air quantity of the TD500 MAX case are sufficient to deal with each day use of such high-end {hardware}.

Within the Aida64 Stress FPU take a look at, the CPU standby temperature was 51 levels in commonplace fan mode, the common temperature following 20 minutes of burn-in reached 90.1 levels, the CPU package deal temperature was 94.8 levels, the CPU temperature at full pace was 86.8 levels, and the CPU package deal temperature was 90.5 levels. Contemplating the surroundings in a closed case and geared up with a 380mm thick radiator, this efficiency is basically good.

The graphics card take a look at half adopts the Furmark 20-minute burn-in take a look at. When the fan pace within the case is preset, the GPU temperature reaches 67.9 levels and the recent spot temperature is 78.5 levels. If the fan within the case is operated at full pace, the GPU temperature is regarding 67.9 levels Celsius. 0.5 levels to 67.4 levels, and the recent spot temperature is 77.9 levels. It’s endorsed that the AIO fan pace and graphics card fan are set to plain mode to deal with each day use.

quiet idle

Silent burning

utterly free

burn utterly

CPU

43.4

90.1

37.9

86.8

CPU package deal

51

94.8

37.8

90.5

PVC

48.7

50.2

45.3

49.3

System 1

38.8

40.7

38.9

39.8

System 2

40

41

38.6

39.6

graphics processor

42

67.9

36.1

67.4

GPU hotspot

51.9

78.5

45.1

77.9

Summarize

41

This time, the newest member of the Coolmax MAX household, TD500 MAX, inherits the unique TD500 case design, with a superb inner house configuration, a GX2 850W ATX 3.0 gold energy provide pre-installed within the case, and a 360 ATMOS all-in-one with a 38mm thick water cooling radiator. Water cooling cannot solely deal with top-standard {hardware} parts, however extra importantly, it saves loads of time in set up and wiring. As well as, the two-stage energy wire connector makes set up and wiring extra handy. Actually a plus.

After buying the case, shoppers solely want easy set up steps to rapidly full the set up. Essentially the most time-consuming and troublesome step in all the strategy of constructing a pc host, Kuma will assist you to full it first, and likewise present circumstances. It gives a 2-year authentic manufacturing facility guarantee, a 5-year authentic manufacturing facility guarantee for the AIO water cooling, and a 10-year guarantee for the facility provide, making it very protected to make use of.

For those who plan to purchase a brand new case or construct a brand new laptop sooner or later, have sufficient price range and wish to save effort and time, chances are you’ll want to think regarding the TD500 MAX in your buy. It is a case price shopping for.

1716951769
#Cooler #Grasp #TD500 #MAX #Preinstalled #ATX3.0 #case #thickened #diploma #built-in #water #cooling #watt #energy #provide #twosection #energy #wire #straightforward #set up

Leave a Replay