Boost WiFi around the house with an old device you probably have at home

Want to connect to your Wi-Fi network wherever you are throughout your home? Want to expand your Wi-Fi coverage without investing in a new router? No problem, it’s all possible! It’s time to get your good old router out of the closet! In this article, discover our tips and tricks for reusing your old router as a Wi-Fi repeater. Let’s go!

Do you have an old router that you no longer use? No question of relegating it to oblivion! Rather than throwing it away, you can reuse it as a Wi-Fi repeater. You might save a few bucks while improving your internet coverage. It is convenient ! Let’s find out together how to get there!

Increase your Wi-Fi range with an old router

Dear readers, do you have an old Wi-Fi router that you no longer use? Configure your device and turn it into a Wi-Fi hotspot! It’s an effective and inexpensive way to extend the range of your Wi-Fi signal. The result is a better connection throughout your home. It’s awesome !

Read also: How to tie a tie? Here is the simplest method, so as not to be mistaken

Wi-Fi router placed in the middle of the table. Source: spm

To install and configure your Wi-Fi router as a repeater, nothing complicated! First you need to connect your extender to your main router. Next, you need to configure the secondary router as a repeater. For this, it will be necessary to modify certain parameters and functionalities, in particular the type of security, the name of the network and the password. It is very simple ! Follow our detailed step-by-step guide!

Now that you know how to use your old device, let’s see how to set it up step by step. One thing is for sure, you have to go regarding it as if it were the main router.

Set IP and Subnet

The first thing to check is that the primary router and the secondary router are using the same subnet. Usually, the management IP address is 192.168.1.1, or in another case, 192.168.0.1. Either way, you need to configure the two routers separately before connecting them to each other.

The central device should have a LAN configured with IP 192.168.1.1, subnet mask 255.255.255.0 or better known as /24. In the case of the LAN for the secondary router, a different IP address will have to be put, outside the DHCP range. However, always use the same subnet mask.

The DHCP server of the old Box router

Next step ! Now you need to configure the DHCP server. This server is a service that automatically assigns an IP address to each device connected to your Wi-Fi network. You must therefore disable the DHCP server of the old router, otherwise you will have network connection problems. And There you go !

Wi-Fi network data

Another important aspect, the wireless network! you must adjust the configuration parameters related to the Wi-Fi network on the main router as well as on your new access point. More than anything, you need to enter the same data on both devices. This way, you won’t have any interference problem. Therefore, you must perform the same configuration on your repeater. All the same except for the Wi-Fi channels to avoid any interference issues. It’s as simple as that !

Read also: The new WhatsApp feature makes life easier for users: it’s exactly what we needed

Connection: Connect the old device to the internet

Once you have completed all the steps related to configuring the network settings, all you have to do is connect your router to the internet. The best way would be to use an Ethernet cable. A network cable will need to be installed between the main router and the LAN port of the second router. If you have a switch at home, in which you have connected the network cable from the main router, then you can connect it to any LAN port on the back of the repeater router. So you can use it as a repeater. There it’s done !

Ports on the back of the Wi-Fi router

Ports on the back of the Wi-Fi router. Source: spm

To extend internet coverage, you can use your old router as a repeater. Thanks to our tips, you will be able to install this equipment and configure it quickly. Easy, efficient and practical! An access point will greatly improve the quality of your connection. We’ll have to get on it!

Read also: 8000 € fine if you do this on the highway, unfortunately many people do it every day

Leave a Replay