If your WiFi goes wrong on some devices you just have to check this to make it fly

2023-05-13 08:03:00

Have Wi-Fi problems on some devices it is quite common. For example, it may be very slow or cut off on television, while using it on your mobile or computer is much better. Why is this happening? The truth is that there are many reasons and factors that can come into play. However, in this article we are going to focus on something simple that you can check in order to improve the wireless network on the computers where you have problems.

Take care of the location and improve Wi-Fi

Something fundamental that you should look at is the device location where you have problems If you are connected from the television and notice that it is cut off or that it is slow, take a good look at what is around you. Keep in mind that there are other devices that may be interfering or even objects that may be blocking the signal.

For example, if you have Bluetooth headphones near the television or even a microwave, you might suffer interference. They are devices that use the 2.4 GHz frequency. This will cause the signal to not reach well, there may be cuts and problems connecting to the network normally.

You might also have the television in a dead zone or where the signal arrives very weak. It can happen if it is boxed in a corner, with thick walls where the signal weakens if the router is far away. Maybe changing its location can make the Wi-Fi considerably better and you have fewer problems.

Therefore, the location of the devices is going to be very important. Avoid making mistakes in this regard. It is essential that you have everything very well prepared, always away from other devices that may interfere and possible obstacles that slow down the wireless signal. Sometimes small changes can greatly improve everything. Check that there is nothing that is damaging.

Use some device to improve the signal

If you see that you do not have any device that is interfering with the signal and there are no obstacles that prevent the connection from being good, what you can do is try to improve the coverage. For this you can use some options that allow you to take the connection from one place to another in the house.

For example, you can use a Wi-Fi repeater. What it does is receive the signal and expand it through the area where you have it located. That will help to have better coverage, as long as you use a quality device. You will be able to connect the television or any device without so many cut problems.

You can also count on PLC devices. They are very useful, since they serve to carry the connection to more distant distances without so much loss. They use electrical wiring to go from one point to another. They are also perfect for connecting any device via Ethernet cable, beyond just using the Wi-Fi network.

In addition, the mesh systems They will help to cover a large area. There are several satellites that connect to each other. This allows the whole house to be covered, since you can always add more satellites to expand.

In short, as it is, you should look very carefully at possible interferences that may exist and obstacles that prevent the signal from reaching correctly. In case you have any problem while surfing the net with television or any other device, it is something that you should observe. You can always use a device to improve coverage. This will help optimize the Internet connection.

1683996577
#WiFi #wrong #devices #check #fly