Summer refuses to abandon us, but even so, there is little left for the cold to begin. So once more we will relight the stove and dust off the braziers. Something that if we do not pay attention can bring us many problems.
carbon dioxide detector
With the arrival of the cold and the price of gas and electricity is reaching, there are many who have chosen to use other, more traditional heating sources such as stoves, fireplaces or braziers. These, in addition to producing heat, also produce smoke and this, if not properly controlled, can cause more than one accident. Combustion causes it to emit CO which is lethal in high amounts so having a detector in our home that warns us can avoid unpleasantness. Poor combustion of the boiler, a leak in the chimney draft or the entrance of smoke from the engine of our car, are the most common causes of this type of accident, which can cost us our lives. The one known as sweet death or produced by CO is more common than we think, so we must be cautious.
Haiman smoke detector | heimman
If you are interested in purchasing a carbon monoxide detectorOn the Internet we find a wide catalog of these. But if what you also need is an intelligent detector that you can connect to the network, we recommend devices such as the one from the brand From homewhich you can make use of with the help of mobile applications such as Yours or smartLife. Its price is regarding 33.99 euros, a very low cost if we compare it with the benefits of its use. This type of device is very easy to install and use, once we have located it in the ideal place, we must activate pairing mode. Depending on the application that we are going to do, it is regarding keeping the pressure on the check button for three seconds or pressing it five times in a row.
To then continue the configuration dfrom the apps following the wizard instructions. And if we use the application Yourswe have the option of create scenes in which we customize actions, so that when certain circumstances occur, the detector will not alert of danger through light signals. These scenes are compatible with Alex’s voice assistantay we can make use of this to check the estado of the device.
Every time we carry out a verification test from the device itself we receive a notification through the application and in this way check if it works correctly and if it is correctly connected to Wi-Fi. In the event that carbon dioxide levels are high, we hear the alarm that warns us of the danger with a sound that reaches up to 85 dB. The device reaches a detection radius of regarding 60 m2 within a room. It works with batteries so we must periodically check the status, although it has an LED light that tells us when to replace them for proper operation. An interesting smoke detector that alerts us to danger when we are inside or outside the house.
SURE YOU ARE INTERESTED:
