You don’t need to be an expert to know how to quickly destroy a tree stump without chemicals. Anyone can whip up a homemade tree stump killer. Engaging in DIY tree stump removal is easy, all using things you already have around your home. There are several reasons to cut down trees. Generally, we do it to clear the ground for construction, for wood or to reduce the risk of falling on our houses during a storm.
As a result, we have one or more tree stumps in our front or back yard
After cutting down a tree, usually a small part of the trunk remains. This part of the trunk contains roots, which means it can regrow or at least be a permanent nuisance. In most cases, a tree stump is unable to grow shoots because it is half dead, although some do. In such cases, it is nothing but an unpleasant sight that can ruin the beauty of your garden. Also, if we choose to keep a tree stump in our home, it can attract insects and even pests. A tree stump just takes up that extra space that you can use for so many other things.
If left untreated, a tree stump can also cause accidents
DIY methods
#Du sel d’Epsom
By using Epsom salt, you can quite easily get rid of a tree stump. It’s a cheap, presaue free method that doesn’t require much time or effort. This method is easiest if you have a drill bit and all types of drills. An electric drill with a battery is the best here, but you can also create the holes with thick and long types of nails and the right types of hammers with a claw to help you remove the nails
You probably already have them in the garage
First, you need to drill holes in the stump as deep as possible. Drill holes in the tree stump to kill it. These holes should be at least 10 cm apart. Drill as many holes as possible on the surface of the stump. These holes should intersect below the surface if possible. Then fill them with Epsom salt. But leave some space at the top to add water. This will dissolve the minerals, but you may need to come back later to add more water as the process progresses.
Be careful when adding water to avoid spillage of the solution
When you’re done, cover the stump with a water-resistant tarp to protect it from rain and sun. You can more easily remove the stump from your garden with the right kinds of axes or even a crowbar to lift it.
After a month or more you will notice the stump drying out
#Burn the tree stump
Burning is another way to kill a tree stump. Controlled burning can be generally free, however, you should take some necessary precautions to ensure it is safe. But outside the city limits in the county, that’s generally okay. For this procedure, it works best if you drill holes once more. Once you have drilled the holes, fill them by pouring kerosene oil or gasoline until the entire stump is completely soaked. Pour evenly over the top and sides. Then, light it by placing a piece of wood or charcoal on top or on the side of the stump. The fire must reach the roots and turn it into ashes.
Watch the surrounding area so as not to cause a fire
#Block sunlight
With this technique, you need to steal sunlight away from your tree stump. Trees need sunlight to complete their photochemical reactions, and they will eventually die if they don’t get the proper amount. You can use a variety of materials to cover a tree stump.
Use canvas, polyester, polyethylene or even a black garbage bag
This procedure is very time consuming, as it is a slow method to deprive a stump of light and then rot. This is the easiest DIY method of removing tree stumps if you have the patience, maybe months.
#Boiling water
This is one of the best and most profitable ways. This technique also attacks the roots using a simple homemade stump destroyer: boiling water. Damaging the roots of the tree stump is its purpose. Take a saucepan and add a substantial amount of water to it. Place it on the stove and wait for the water to boil. Then pour this hot water directly on the roots of the tree stump. For this method to work, it is crucial to ensure that the majority of the root system is fully burned.
Like the other techniques, this will also kill the tree stump by deteriorating it
All the ideas that have been discussed in this list are very effective. You can use these methods at any time without worrying regarding not having heavy tools or equipment. If you don’t want your garden to look neglected and shabby, you need to take care of it. Also, you don’t use no harmful chemicals or herbicides when performing these methods. Whichever idea you choose to remove that unwanted part of a tree, they will all do wonders for you. However, it’s always best to hire a professional tree removal service to handle the job if you have specific questions or confusions regarding the run and want it done quickly. They can also guide you on how to save a dying tree. They know how to quickly kill a tree stump, usually with a large saw blade that turns them into sawdust in a few passes, called a stump grinder.
Then all you have to do is fill the hole and see grass grow on it
For any questions you have regarding tree removal be sure to visit Trav’s Trees.
Sources :