There are many credible sources of news, all of whom consistently claim that the iPhone 14 Pro series will use a “hole-digging/punch-hole screen” instead to present an exclamation point design. Sources from Apple’s supply chain show that Apple is regarding to make a bang for the iPhone 14, revealing the overall design and details of the upcoming iPhone 14.
From the 3D CAD file of the iPhone 14 Pro, it can be found that Apple will remove the bangs of the iPhone 14 and use a punch-hole and pill design instead, forming an exclamation point punch symbol. The punch-hole screen is mainly used to accommodate the Face ID sensor and front Place the lens while retaining the upper and lower display areas of the screen, and further increase the screen ratio of the iPhone 14, which is significantly different from the current Android phone with a separate punch-hole screen.
The microphone receiver is also maintained on the top frame, the power button is located on the right side of the fuselage, and the original volume button, mute button and SIM card slot are also retained on the left side.
The source also revealed that the iPhone 14 Pro screen will maintain the same 6.1-inch size as the iPhone 13 Pro, and the iPhone 14 Pro Max will also remain 6.7 inches, both with 120Hz Pro Motion OLED high-brush technology.
On the back of the iPhone 14 Pro, it is exactly the same as the previous generation, with triple lenses, LED True Tone flash, microphone and LiDAR For the LiDAR scanner, the height of the lens will also be raised, and the thickness of the body is expected to be the same as the previous generation.
The bottom charging hole is also designed with Lightning, and the speaker and microphone openings are exactly the same as the previous generation, and not much has changed. From the CAD files, it can be seen that the appearance of the iPhone 14 Pro has not changed too much, except that the bangs are changed to a punch-hole screen, which is more obvious, but the basic models of the iPhone 14 and iPhone 14 Max will continue to use the original bangs design.
In fact, it is not the first time that the iPhone 14 bangs switch to a punch-hole screen. As early as February, a scan of a suspected iPhone 14 mold came out in advance. Mr. Crazy was comparing and found that the punch-hole location just corresponds to the original bangs area, which also confirmed this. The authenticity of the pictures is quite high. If compared with the CAD files, the designs of the two are very coincidental and exactly the same.usuallyApple to start trial production of new iPhones in late Februaryit can be roughly determined that the switch to the punch-hole screen for the iPhone 14 Pro seems to have been finalized.
Recently, whether it is Guo Minghao or exclusive news from foreign media, it shows that only the iPhone 14 Pro and Pro Max will use the A16 bionic chip, and the entry-level iPhone 14 and 14 Max will be equipped with the previous generation iPhone 13 Pro series A15 bionic Chip, starting in 2022, Apple will implement a processor differentiation strategy to distinguish between basic and flagship models.
In addition, the iPhone 14’s memory will also be fully upgraded to 6GB. It is expected that the adjustment of the memory will have a great relationship with the improvement of the lens. It is reported that the main lens will be switched to 48MP and 8K video recording. It is expected that more related iPhone 14 leaks will flow out next week.
Further reading:
